Cart Copy Created with Sketch.
0

Geon Tile Design Hero Promo! For a Limited Time, take advantage of our Geon Tile Design Hero promo.

NanoSeal GT - Product Sheet

A unique nano-technology, ultra-low gloss single component coating for an amazingly broad range of applications. NanoSeal GT is a topical sealer and does not penetrate into the cement. It is designed to bond to the surface of the material to create a protective barrier. While ideal for encaustic cement tile, it can be used over all types of masonry and engineered cements.

NanoSeal GT is UV stable for exterior and interior use, for use over both tight and open surfaces. It is very fast drying for job-site efficiency, water submersible with early water resistance, low odour, and offers excellent blush resistance.

It is VOC compliant, and both a colour carrier and colourable sealer. When completely cured, NanoSeal GT meets the performance characteristics of FDA 4- 101.11 for food contact surfaces. Coverage is 250 sq.ft to 1000 sq.ft per gallon/coat, substrate dependent. Apply at room temperature and in low humidity with good air flow. Store at room temperature and do not let freeze before applying. Follow product directions for application and surface preparation. Close and properly dispose of bottles and treat as job-site chemical waste. Clean up using soap and water. A small amount of acetone assists in cleaning spray guns. Subject to Geon Tile limited warranty and restocking policy. For full maintenance procedures and additional support, please visit geontile.com.

For the full article, download below!

Resources

Download the PDF of this guide below

NanoSeal GT - Product Sheet